Shadow 2 Harbinger V2 Slide Milling
Description
Model: CZ Shadow 2 ( NON OPTIC READY MODELS ONLY!)
Service: CNC mill your supplied slide for optic, removing rear dovetail & weight reduction (Optic MUST be sent with slide - no exceptions.) ONLY select NO optic cut if you want the rest of the package without the optic cut.
Finish: Cerakote® or Black Nitride
BUIS: Back Up Iron Sight Adapter Plate includes the corresponding front sight.
-Material: 7075- T6 (Nearly twice the strength of 6061.)
-Finish: Mil-Spec Type III hard coat anodizing
-Hardware: Included (Torx key/screws/loctite/instructions)
-Iron Sights: The integrated fiber optic rear sight is .440" tall, giving you a lower 1/3 co-witness. Front Sight height : .370"
-Included Fiber optic rods: Black, White, Red, Green (You choose installed color)
** As of 11/01/2021 Two Modifications have been made to the Trijicon RMR®/SRO®(Holosun 507C/508C) milling option. This selection now has a shelf milled in front of the optic pocket to accommodate the hood of the SRO®. We have also changed from our proprietary screws to commonly available 5-40 screws. These two modifications have allowed us to mill the optic pocket as close to the center of bore as possible, without milling into the firing pin channel. **
DISCLAIMER:
-We do not use the factory supplied screws for the following optics -
- Trijicon RMR/ SRO
- Holosun 507C/ 507Comp
-We use standard, readily available 5-40 screws that can be found at your local hardware store.
-You can also purchase replacement screws here: https://primarymachine.com/cz-shadow-2-optic-screws/
-Your slide may have a portion of threads show through the rear serrations from the optic milling process. This is unfortunately unpreventable, but does not lessen the integrity of the slide, optic pocket, or the mounted optic.
CERAKOTE DISCLAIMER:
Due to the nature of Cerakote, the fitment of your slide on your frame may become tight when you receive your slide.
If this is the case, please contact us for free rail fitting.
94 Reviews
-
SRO Slide Mill & Cerakote
Just got back from the range. Love the new SRO on my Shadow 2. There machine work and Cerakote (Battle worn red) was fantastic. Cannot go wrong with Primary Machine.
-
Shadow 2 Harbinger V2
Got it back in roughly 4 weeks, looks spectacular. The SRO is milled so deep you can’t even get a business card between it and the top of the slide, you can see light between the optics hood of the SRO and the slide but it is milled to perfection... the slide is light and fast under recoil. The Battle Worn finish is very well done. My Shadow 2 Orange will also be making a trip down there once my eyes can’t handle the iron sights any longer.
-
bad A$$$
Alright got the slide and DPP back two days ago, slide to frame fit overly tight which is expected from a battle worn cerakote job. Uses my Drexel felt pads and mothers mag to polish up the rails and joila fits like butter. Took it out and put 200 rounds through it yesterday.OMG whole new feelings. It hardly moves with 135pf loads. My deputies that were with me are very jealous. I shot it alongside my staccato p duo and tit shoots flatter than my 2011. Highly recommend
-
Awesome Slide Milling
I sent my CZ Shadow 2 slide out to get the V2 slide cut and I added every option I really wanted. I added the front sight blank, engraved CZ Shadow 2 and the black nitride to keep it looking close to factory as I could. It came out amazing and only took about 5 weeks to get it back to me.
-
Shadow 2 Harbinger V@ + SRO Optic Mill Job
This shop is by far the very best in the entire industry for milling work. They actually thought out where the weight of a slide resides and designed a lightning package that spreads the cuts over as much length of the slide as possible fore and aft. Compared to other shops, this is true precision milling. My "Bill Drill" typical ten yard groups are the size of a coin dollar with double drills just as accurate with 0.15-0.16 splits consistently. Don't even think of any other shop for this work. Just Get It Done At Primary Machine
Greg Olson / USPSA Competitor -
Shadow 2 Slide Work
There's not much that can be said, that hasn't been said already. The machine work is flawless and the cerakote job was extremely well done. I had them do a battleworn graphite black and zombie green, and it was perfect. If you've got a Glock or CZ and need custom work done, Primary Machine is the answer!
-
SHADOW 2 HARBINGER SLIDE MILLING
The pictures on the website are nice. But that milled slide looks even better "in person". Fantastic job! Highly recommend!
-
Shadow 2 slide milling
Just got my second slide back from Primary Machine. First one was machined for Carry Optics with lightening cuts. Second one just had the lightening cuts done. Now I have a Shadow 2 that can shoot USPSA CO and Limited and IDPA CO and ESP. Fantastic quality of work and every time i'm at a match I get questions and comments. Highly reccomended.
-
SHADOW 2 HARBINGER SLIDE MILLING
Excellent work, no issue of an kind, strongly recommend
Related Products
TS 2 Harbinger V2 Slide Milling
Iron-Sight-Ready Shadow 2 Harbinger V2 Drop In Slide
TS 2 Harbinger V1 Slide Milling
Pre-Sale Shadow 2 Harbinger V1 Drop In Slide
CZ P-01 Harbinger V1 Slide Milling
Optic-Milled-Only Shadow 2 Drop-In Slide
