Shadow 2 Harbinger V2 Slide Milling
Description
Model: CZ Shadow 2 ( NON OPTIC READY MODELS ONLY!)
Service: CNC mill your supplied slide for optic, removing rear dovetail & weight reduction (Optic MUST be sent with slide - no exceptions.) ONLY select NO optic cut if you want the rest of the package without the optic cut.
Finish: Cerakote® or Black Nitride
BUIS: Back Up Iron Sight Adapter Plate includes the corresponding front sight.
-Material: 7075- T6 (Nearly twice the strength of 6061.)
-Finish: Mil-Spec Type III hard coat anodizing
-Hardware: Included (Torx key/screws/loctite/instructions)
-Iron Sights: The integrated fiber optic rear sight is .440" tall, giving you a lower 1/3 co-witness. Front Sight height : .370"
-Included Fiber optic rods: Black, White, Red, Green (You choose installed color)
** As of 11/01/2021 Two Modifications have been made to the Trijicon RMR®/SRO®(Holosun 507C/508C) milling option. This selection now has a shelf milled in front of the optic pocket to accommodate the hood of the SRO®. We have also changed from our proprietary screws to commonly available 5-40 screws. These two modifications have allowed us to mill the optic pocket as close to the center of bore as possible, without milling into the firing pin channel. **
DISCLAIMER:
-We do not use the factory supplied screws for the following optics -
- Trijicon RMR/ SRO
- Holosun 507C/ 507Comp
-We use standard, readily available 5-40 screws that can be found at your local hardware store.
-You can also purchase replacement screws here: https://primarymachine.com/cz-shadow-2-optic-screws/
-Your slide may have a portion of threads show through the rear serrations from the optic milling process. This is unfortunately unpreventable, but does not lessen the integrity of the slide, optic pocket, or the mounted optic.
CERAKOTE DISCLAIMER:
Due to the nature of Cerakote, the fitment of your slide on your frame may become tight when you receive your slide.
If this is the case, please contact us for free rail fitting.
100 Reviews
-
Harbinger milling
Looks great and well thought out. Very clean milling and contrasting cerakote is very well applied. A bit tight at first but a dab of polish on the rails and a hundred cycles by hand smoothed it out.
-
CZ shadow 2
Not the first time using your company services amazing job looking forward to do business again!!!
Thank you so much -
Shadow 2 Harbinger V2 nitride
This slide cut design is the best out there for a Shadow 2 slide, the execution of the work is second to none. Holosun Comp is slammed way down on the slide. I am glad I opted for the nitride finish it has a very slick surface and deep matte finish. I could not be happier with the workmanship and finish product. If you are on the fence stop wasting time. Thank you Primary Machine
-
Better than expected
Workmanship and camo coating were perfect. The coating added a little thickness as I knew it would. Had to oil the barrel to get it back into the slide. Racked it about 500 times to smooth it up and had zero issues my first range trip. It easily made weight for idpa. It reduced felt recoil by about 20% and cycles faster now. I would highly recommend this! 10/10
-
Slide Milling
Great work and customer service! I wouldn’t trust anyone else.
-
Shadow 2 Orange, Harbinger V2 Slide Milling
Finally decided to send it in to get it cut for a HS comp optic & get the slide lightening/refinshed. So let me start by saying Primary Machine art true artists in every way. 1.There turn around time was faster then stated. 2. The machining was flawless & amazing. 3. The finish was spot on & actually looked better than the factory finish. My Shadow 2 orange slide to frame fit was already super tight, after receiving the finished slide back it was almost impossible to get them back together. After lightly sanding the slide rails w/1000 grit they were able to assemble. After I got them to mate up it was still too tight to cycle reliably. So I gat some JB bore lapping compound & some light weight oil & made a lapping paste, coated the rails and started to work the frame & slide back & forth. After about 10 min the slide to frame fit was perfect. It felt smooth as glass. Absolutely gorgeous, thanks guys.
-
V2 Slide
Great job!
-
SHADOW 2 HARBINGER V2 SLIDE MILLING
Well worth it! Machining and detail was flawless! Engraving shadow2 came out perfect. Super clean finishing and debur work. Went with nitride which came out great. I like how low the cut is to the bore axis, Holosun comp sits low and easy to pick up dot sight when shooting. I would definitely do it again! Thanks Primary, great job!
-
shadow 2
the slide work and optic mount turned out really nice, definitely worth the wait. the detail is crazy good!!!5 stars and great customer service
Related Products
TS 2 Harbinger V2 Slide Milling
Iron-Sight-Ready Shadow 2 Harbinger V2 Drop In Slide
