Shadow 2 Harbinger V2 Slide Milling
Description
Model: CZ Shadow 2 ( NON OPTIC READY MODELS ONLY!)
Service: CNC mill your supplied slide for optic, removing rear dovetail & weight reduction (Optic MUST be sent with slide - no exceptions.) ONLY select NO optic cut if you want the rest of the package without the optic cut.
Finish: Cerakote® or Black Nitride
** As of 11/01/2021 Two Modifications have been made to the Trijicon RMR®/SRO®(Holosun 507C/508C) milling option. This selection now has a shelf milled in front of the optic pocket to accommodate the hood of the SRO®. We have also changed from our proprietary screws to commonly available 5-40 screws. These two modifications have allowed us to mill the optic pocket as close to the center of bore as possible, without milling into the firing pin channel. **
DISCLAIMER:
We do not use the factory supplied screws for the following optics -
- Trijicon RMR/ SRO
- Holosun 507C/ 507Comp
We use standard, readily available 5-40 screws that can be found at your local hardware store.
You can also purchase replacement screws here: https://primarymachine.com/cz-shadow-2-optic-screws/
CERAKOTE DISCLAIMER:
Due to the nature of Cerakote, the fitment of your slide on your frame may become tight when you receive your slide.
If this is the case, please contact us for free rail fitting.
91 Reviews
-
Shadow 2 Harbinger V2
This was my second slide that I have had an SRO mounted on. Once again the cut is sooooo low. The optic fits like it was made for the gun. The slide lightening was perfect. And the battle worn finish came out perfectly. Got it on the gun and went to town. Everything worked as expected and the gun looks great...
-
Great slide work
Great slide work and relatively quick turn around. I would recommend primary machine to anyone.
-
Cz shadow 2 slide machine cut and cerakote
Realy nice job!!
-
CZ Shadow 2 slide work.
Quality workmanship. Beautiful.
-
Harbinger V2 Slide milling
So, I very rarely write reviews, but this one deserves it.
First of all, I spent about two months peppering Bruce with all sorts of questions as they came to me. Like myself, apparently, Bruce responds to work emails well after hours. I would think of a question at 11PM, and shoot out an email beforeforgot about it. 9 times out of 10, I would hear back within 10 minutes. So customer service is off the charts.
I had decided to move my Shadow 2 to CO division, and needed to decide where I wanted the optics cut done. After a great deal of research (and as Bruce can attest, lots of late night emails,) I settled on Primary Machine. I am very glad I did.
I waited for Black Friday, wanting to take advantage of any sales that might crop up at that time. Wait time was advertised as four weeks, which was fine with me as it is the offseason.
I chose to cerakote the slide in Concrete Grey, because it is a very close grey to the one that Lok uses in their G10 grips. I also chose the front sight blank (because I am anal retentive) as well and the Shadow 2 lettering.
I placed my order on 11/28, and the slide was received by PM on 12/8 (I waited a few days to ship.) I received an email on 12/14 that my order was shipping. I ordered a couple of other things, so I assumed that it was those smaller items. I contacted PM to be sure, and lo and behold, the slide was on its way! So, a seven day turnaround.
The work is amazing, and the optic is seated deaper than I would have thought possible. First range trip today, and I could not be happier. Looks great, shoots flat. Doesn't get any better than that!
So, long story short, Get your slide and cerakote work done by PM, you will be happy that you did!!
-
Slide
Great work and better customer service
-
SRO Slide Mill & Cerakote
Just got back from the range. Love the new SRO on my Shadow 2. There machine work and Cerakote (Battle worn red) was fantastic. Cannot go wrong with Primary Machine.
-
Shadow 2 Harbinger V2
Got it back in roughly 4 weeks, looks spectacular. The SRO is milled so deep you can’t even get a business card between it and the top of the slide, you can see light between the optics hood of the SRO and the slide but it is milled to perfection... the slide is light and fast under recoil. The Battle Worn finish is very well done. My Shadow 2 Orange will also be making a trip down there once my eyes can’t handle the iron sights any longer.
-
bad A$$$
Alright got the slide and DPP back two days ago, slide to frame fit overly tight which is expected from a battle worn cerakote job. Uses my Drexel felt pads and mothers mag to polish up the rails and joila fits like butter. Took it out and put 200 rounds through it yesterday.OMG whole new feelings. It hardly moves with 135pf loads. My deputies that were with me are very jealous. I shot it alongside my staccato p duo and tit shoots flatter than my 2011. Highly recommend
Related Products
TS 2 Harbinger V2 Slide Milling
TS 2 Harbinger V1 Slide Milling
