Shadow 2 Harbinger V2 Slide Milling
Description
Model: CZ Shadow 2 ( NON OPTIC READY MODELS ONLY!)
Service: CNC mill your supplied slide for optic, removing rear dovetail & weight reduction (Optic MUST be sent with slide - no exceptions.) ONLY select NO optic cut if you want the rest of the package without the optic cut.
Finish: Cerakote® or Black Nitride
BUIS: Back Up Iron Sight Adapter Plate includes the corresponding front sight.
-Material: 7075- T6 (Nearly twice the strength of 6061.)
-Finish: Mil-Spec Type III hard coat anodizing
-Hardware: Included (Torx key/screws/loctite/instructions)
-Iron Sights: The integrated fiber optic rear sight is .440" tall, giving you a lower 1/3 co-witness. Front Sight height : .370"
-Included Fiber optic rods: Black, White, Red, Green (You choose installed color)
** As of 11/01/2021 Two Modifications have been made to the Trijicon RMR®/SRO®(Holosun 507C/508C) milling option. This selection now has a shelf milled in front of the optic pocket to accommodate the hood of the SRO®. We have also changed from our proprietary screws to commonly available 5-40 screws. These two modifications have allowed us to mill the optic pocket as close to the center of bore as possible, without milling into the firing pin channel. **
DISCLAIMER:
-We do not use the factory supplied screws for the following optics -
- Trijicon RMR/ SRO
- Holosun 507C/ 507Comp
-We use standard, readily available 5-40 screws that can be found at your local hardware store.
-You can also purchase replacement screws here: https://primarymachine.com/cz-shadow-2-optic-screws/
-Your slide may have a portion of threads show through the rear serrations from the optic milling process. This is unfortunately unpreventable, but does not lessen the integrity of the slide, optic pocket, or the mounted optic.
CERAKOTE DISCLAIMER:
Due to the nature of Cerakote, the fitment of your slide on your frame may become tight when you receive your slide.
If this is the case, please contact us for free rail fitting.
94 Reviews
-
Amazing work
Sent my Shadow 2 slide in for milling and an optic cut. The work came back clean and nitriding is extremely smooth and dark. Front cocking serrations are sharp and easy to grip. Not sure if it’s ok to rack with the optic but prefer the cocking serrations up front because they’re so easy to manipulate the gun with. Gun shoots great with the modifications and the machining work is beautiful.
-
Shadow 2 Harbinger v2 slide milling
The slide was delivered in the time frame specified. The quality of work was top notch. I would recommend this company highly and would send any firearm that I needed milling to this company. very impressed.
-
Harbinger V2 slide milling
Looks even better than I hoped. The craftsmanship and finish is awesome. I should have sent in the barrel for a color and milling.
-
Shadow 2 Harbinger V2 Slide Milling for Shadow 2
The slide turned out awesome as usual. Really like the detail and window cuts. Craftsman ship is excellent and the turn around time was spot on.This is the fifth slide they have had done for me and it is one of the best. Plan on sending my Accu Shadow 2 slide next. Keep up the great work.
-
Unbelievable
I sent my slide in an attempt to make my Shadow 2 the baddest IDPA legal gun on the planet. Primary Machine DELIVERED!
The machining and cerakote are second to none and the entire completed pistol with mag came in at 42.75oz as advertised.....
Could not be happier. THANKS! -
Harbinger V2 Slide Milling / Romeo 3 MAX
Absolutely fantastic job on my slide. Even though my optic wasn’t one of the standard selections it was perfectly fit. The SIG optics should be mounted with a slight forward gap... this isn’t the most well known fact and since it’s not a standard option I didn’t expect the guys at Primary Machine to be aware of it (I didn’t say anything because I didn’t want to be that guy who tells pros how to do what they do) but it came back set up perfectly. The machine work is flawless as is the Cerakote. I’ll be sending my backup slide and optic in in short order for the same treatment. And I will be showing it off to all of my CZ shooting buddies at the next match!
-
Shadow 2 Harbinger V2 Slide Milling
I wanted to mount an optic on my Shadow 2. I tried the dovetail mount and quickly noticed that the dovetail caused the red dot on my DPP to be set really high. I wasn't happy with the sight picture so started doing research on getting the slide milled for the DPP. Extremely happy that I was able to find Primary Machine. The fit and finish of the mill work is second to none. The DPP sits low on the slide and I'm now extremely happy with the sight picture. To me, it looks OEM.
Primary Machine advertised it takes about 3-4 weeks to have everything done once they receive your slide/optic and they delivered on that promise. Communication was great and responsive. Price is very reasonable considering the work that is put in. Get rid of that dovetail mount and send in your slide to Primary Machine asap! Highly recommend!!!! -
Harbinger v2 slide milling
Waited for DLC. exactly 6 week turnaround. Machine work is tremendously detailed. finish is flawless.
-
SHADOW 2 HARBINGER V2 SLIDE MILLING
This looks even better than advertised and Bruce is super quick to respond and very helpful. I went with the Graphite Black finish to match as close to stock as possible and it looks fantastic!! Cuts are amazing!! Now that I've seen their work, I'm looking through my collection to see my next project.
Related Products
TS 2 Harbinger V2 Slide Milling
Iron-Sight-Ready Shadow 2 Harbinger V2 Drop In Slide
TS 2 Harbinger V1 Slide Milling
Pre-Sale Shadow 2 Harbinger V1 Drop In Slide
CZ P-01 Harbinger V1 Slide Milling
Optic-Milled-Only Shadow 2 Drop-In Slide
