Shadow 2 Harbinger V2 Slide Milling
Description
Model: CZ Shadow 2 ( NON OPTIC READY MODELS ONLY!)
Service: CNC mill your supplied slide for optic, removing rear dovetail & weight reduction (Optic MUST be sent with slide - no exceptions.) ONLY select NO optic cut if you want the rest of the package without the optic cut.
Finish: Cerakote® or Black Nitride
BUIS: Back Up Iron Sight Adapter Plate includes the corresponding front sight.
-Material: 7075- T6 (Nearly twice the strength of 6061.)
-Finish: Mil-Spec Type III hard coat anodizing
-Hardware: Included (Torx key/screws/loctite/instructions)
-Iron Sights: The integrated fiber optic rear sight is .440" tall, giving you a lower 1/3 co-witness. Front Sight height : .370"
-Included Fiber optic rods: Black, White, Red, Green (You choose installed color)
** As of 11/01/2021 Two Modifications have been made to the Trijicon RMR®/SRO®(Holosun 507C/508C) milling option. This selection now has a shelf milled in front of the optic pocket to accommodate the hood of the SRO®. We have also changed from our proprietary screws to commonly available 5-40 screws. These two modifications have allowed us to mill the optic pocket as close to the center of bore as possible, without milling into the firing pin channel. **
DISCLAIMER:
-We do not use the factory supplied screws for the following optics -
- Trijicon RMR/ SRO
- Holosun 507C/ 507Comp
-We use standard, readily available 5-40 screws that can be found at your local hardware store.
-You can also purchase replacement screws here: https://primarymachine.com/cz-shadow-2-optic-screws/
-Your slide may have a portion of threads show through the rear serrations from the optic milling process. This is unfortunately unpreventable, but does not lessen the integrity of the slide, optic pocket, or the mounted optic.
CERAKOTE DISCLAIMER:
Due to the nature of Cerakote, the fitment of your slide on your frame may become tight when you receive your slide.
If this is the case, please contact us for free rail fitting.
94 Reviews
-
Shadow 2 harbinger v2 and optic cut
Milling and optic cut are perfect couldn't be happier. Finish is perfect. Definitely will be a repeat customer!
-
Speechless
The craftsmanship and the communication is second to none. I look forward to working with this company in the future for all my needs. Thank you !
-
Great
Awesome job. It looks great. What a job. It took about a month. It’s worth waiting.Thank you. 10stars
-
Harbinger v2 goodness
Very clean and the work was performed way faster than expected. One point to let those of you with single action only guns know though is that the cz logo is moved slightly to the rear on these guns so this machining won't take all of it off. Doesn't really bother me but if it would you buy another non sa slide to send because they do an awesome job and it looks so cool!
-
CZ shadow 2 slide
Great slide!
-
Beautifully machined
Pretty impressed with the machining done. All cuts were very clean. Optic is sitting securely and beautifully in the slide. Took a bit longer than advertised and I'd have appreciated a bit more of a status update.
Office staff response time and service was absolutely phenomenal to all questions asked. Easy to tell these folks stand behind their work with pride from start to finish. Will definitely recommend Primary Machine to others for slide work. -
Quality/craftsmanship and aesthetics aside, the function gives an already amazing gun even better!
First off, hats off to PM for the 4week turnaround when they stated 6-8weeks on their site. I received my slide back 2 days after they shipped it, and this is coming from Louisiana to Seattle, WA! My Shadow 2 Orange now shoots almost comparable to an Open gun! The lighter weight from the Harbinger V2 cuts and a DEEP optic cut make the reciprocating mass almost non-existent, hence minimal recoil and faster action to put you back on zero. Overall balance of the gun is greatly improved as well. Can't wait to to it to speed on my next USPSA match (CO). If there was one gripe, it would be the cerakote made the already tight slide/frame fit of the Orange too tight to cycle and I had to polish the rails to help speed up the break in process and revert the action back to it's glass smooth operation. Nevertheless, EXTREMELY pleased with the end results! Worth the wait for sure!
-
Superior Fit & Finish
Being a first time customer and only seeing pictures or reading reviews doesn’t even compare to the jaw dropping quality up close when I opened the box with my Harbinger V2 slide inside. The milling tolerances, coverage & quality of its final finish is superior to anything I have seen with custom work. It will definitely have me returning to Primary Machine for more work in the near future. This being my own personal competition pistol for the 2022 season you guys have made this build unique for me which is why I am promoting it on my company Instagram hardball_ballistics and our website homepage
https://hardballballistics.com
Thank you So Much!!!
Martin Holden
HB, LLC -
Shadow 2 Harbinger V2 Slide Milling
Awesome work on the slide, looks beautiful and functions great. Milled for Trijicon SRO and fits perfect. Love shooting CZ’s with this setup. This is my 2nd. Harbinger slide and I could not be happier. Keep up the great work.
Related Products
TS 2 Harbinger V2 Slide Milling
Iron-Sight-Ready Shadow 2 Harbinger V2 Drop In Slide
TS 2 Harbinger V1 Slide Milling
Pre-Sale Shadow 2 Harbinger V1 Drop In Slide
CZ P-01 Harbinger V1 Slide Milling
Optic-Milled-Only Shadow 2 Drop-In Slide
