Shadow 2 Harbinger V2 Slide Milling
Description
Model: CZ Shadow 2 ( NON OPTIC READY MODELS ONLY!)
Service: CNC mill your supplied slide for optic, removing rear dovetail & weight reduction (Optic MUST be sent with slide - no exceptions.) ONLY select NO optic cut if you want the rest of the package without the optic cut.
Finish: Cerakote® or Black Nitride
BUIS: Back Up Iron Sight Adapter Plate includes the corresponding front sight.
-Material: 7075- T6 (Nearly twice the strength of 6061.)
-Finish: Mil-Spec Type III hard coat anodizing
-Hardware: Included (Torx key/screws/loctite/instructions)
-Iron Sights: The integrated fiber optic rear sight is .440" tall, giving you a lower 1/3 co-witness. Front Sight height : .370"
-Included Fiber optic rods: Black, White, Red, Green (You choose installed color)
** As of 11/01/2021 Two Modifications have been made to the Trijicon RMR®/SRO®(Holosun 507C/508C) milling option. This selection now has a shelf milled in front of the optic pocket to accommodate the hood of the SRO®. We have also changed from our proprietary screws to commonly available 5-40 screws. These two modifications have allowed us to mill the optic pocket as close to the center of bore as possible, without milling into the firing pin channel. **
DISCLAIMER:
-We do not use the factory supplied screws for the following optics -
- Trijicon RMR/ SRO
- Holosun 507C/ 507Comp
-We use standard, readily available 5-40 screws that can be found at your local hardware store.
-You can also purchase replacement screws here: https://primarymachine.com/cz-shadow-2-optic-screws/
-Your slide may have a portion of threads show through the rear serrations from the optic milling process. This is unfortunately unpreventable, but does not lessen the integrity of the slide, optic pocket, or the mounted optic.
CERAKOTE DISCLAIMER:
Due to the nature of Cerakote, the fitment of your slide on your frame may become tight when you receive your slide.
If this is the case, please contact us for free rail fitting.
100 Reviews
-
Awesome Slide Milling
I sent my CZ Shadow 2 slide out to get the V2 slide cut and I added every option I really wanted. I added the front sight blank, engraved CZ Shadow 2 and the black nitride to keep it looking close to factory as I could. It came out amazing and only took about 5 weeks to get it back to me.
-
Shadow 2 Harbinger V@ + SRO Optic Mill Job
This shop is by far the very best in the entire industry for milling work. They actually thought out where the weight of a slide resides and designed a lightning package that spreads the cuts over as much length of the slide as possible fore and aft. Compared to other shops, this is true precision milling. My "Bill Drill" typical ten yard groups are the size of a coin dollar with double drills just as accurate with 0.15-0.16 splits consistently. Don't even think of any other shop for this work. Just Get It Done At Primary Machine
Greg Olson / USPSA Competitor -
Shadow 2 Slide Work
There's not much that can be said, that hasn't been said already. The machine work is flawless and the cerakote job was extremely well done. I had them do a battleworn graphite black and zombie green, and it was perfect. If you've got a Glock or CZ and need custom work done, Primary Machine is the answer!
-
SHADOW 2 HARBINGER SLIDE MILLING
The pictures on the website are nice. But that milled slide looks even better "in person". Fantastic job! Highly recommend!
-
Shadow 2 slide milling
Just got my second slide back from Primary Machine. First one was machined for Carry Optics with lightening cuts. Second one just had the lightening cuts done. Now I have a Shadow 2 that can shoot USPSA CO and Limited and IDPA CO and ESP. Fantastic quality of work and every time i'm at a match I get questions and comments. Highly reccomended.
-
SHADOW 2 HARBINGER SLIDE MILLING
Excellent work, no issue of an kind, strongly recommend
-
Outstanding
I had the full package with the nitride finish done with the Trijicon SRO. The quality of workmanship is simply fantastic. After I received it, I added some oil and took it to the range. I had it dialed in in just a couple minutes. What a tack driver! I’ll be shooting carry optics with it this spring and can’t wait. Having the nitride finish done took a bit longer, but was well worth the wait. This is my second Primary Machine slide (bought a G19 slide from Primary Arms), and likely won’t be my last.
-
SHADOW 2 CARRY OPTICS WEIGHT REDUCTION
Absolutely the way to go if you need any milling work done to any firearm you own. Cannot say enough great things about this company, Primary Machines attention to detail and craftsmanship is second to none. Shot the Shadow 2 in a USPSA match this last Sunday it ran flawless and looks Bad Ass. Thanks again PM Great Job!!
-
Awesome work!
Second slide I’ve had done by Primary Machine and couldn’t be happier with the work. They took my overweight Shadow 2 slide and turned it into a supermodel.
Related Products
TS 2 Harbinger V2 Slide Milling
Iron-Sight-Ready Shadow 2 Harbinger V2 Drop In Slide
