Shadow 2 Optic Milling

Model: CZ Shadow 2

Service: CNC Mill Slide For Optic (Optic MUST Be Sent With Slide - No Exceptions)

Finish: Cerakote Or Black Nitride

Other: We mill precision pockets for your optic! While many companies will mill an over sized "one size fits all" pocket, ours is precision as per your optic. The cycling of a pistol slide is not gentle. The last thing you want is all that force to simply be on the mounting screws due to an optic pocket milled too big! Screws have been known the shear and break over time due to improperly milled slides. 

BUIS: Back Up Iron Sight Adapter Plate includes the corresponding front sight. 

-Material: 7075- T6 (Nearly twice the strength of 6061.)

-Finish: Mil-Spec Type III hard coat anodizing 

-Hardware: Included (Torx key/screws/loctite/instructions)

-Iron Sights: The integrated fiber optic rear sight is .440" tall, giving you a lower 1/3 co-witness. Front Sight height : .370" 

-Included Fiber optic rods: Black, White, Red, Green (You choose installed color) 

 **** As of 11/01/2021 Two Modifications have been made to the SRO/RMR/507/508 milling option. This selection now has a shelf milled in front of the optic pocket to accommodate the hood of the SRO. We have also changed from our proprietary screws to commonly available 5-40 screws. These two modifications have allowed us to mill the optic pocket as close to the center of bore as possible, without milling into the firing pin channel.

 DISCLAIMER: 

-We do not use the factory supplied screws for the following optics -  

• Trijicon RMR/ SRO
• Holosun 507C/ 507Comp

-We use standard, readily available 5-40 screws that can be found at your local hardware store.

-You can also purchase replacement screws here: https://primarymachine.com/cz-shadow-2-optic-screws/ 

-Your slide may have a portion of threads show through the rear serrations from the optic milling process. This is unfortunately unpreventable, but does not lessen the integrity of the slide, optic pocket, or the mounted optic. 

CERAKOTE DISCLAIMER: 

Due to the nature of Cerakote, the fitment of your slide on your frame may become tight when you receive your slide.

If this is the case, please contact us for free rail fitting.