Description
Model: CZ Shadow 2
Service: CNC Mill Slide For Optic (Optic MUST Be Sent With Slide - No Exceptions)
Finish: Cerakote Or Black Nitride
Other: We mill precision pockets for your optic! While many companies will mill an over sized "one size fits all" pocket, ours is precision as per your optic. The cycling of a pistol slide is not gentle. The last thing you want is all that force to simply be on the mounting screws due to an optic pocket milled too big! Screws have been known the shear and break over time due to improperly milled slides.
**** As of 11/01/2021 Two Modifications have been made to the SRO/RMR/507/508 milling option. This selection now has a shelf milled in front of the optic pocket to accommodate the hood of the SRO. We have also changed from our proprietary screws to commonly available 5-40 screws. These two modifications have allowed us to mill the optic pocket as close to the center of bore as possible, without milling into the firing pin channel.
DISCLAIMER:
We do not use the factory supplied screws for the following optics -
- Trijicon RMR/ SRO
- Holosun 507C/ 507Comp
We use standard, readily available 5-40 screws that can be found at your local hardware store.
You can also purchase replacement screws here: https://primarymachine.com/cz-shadow-2-optic-screws/
CERAKOTE DISCLAIMER:
Due to the nature of Cerakote, the fitment of your slide on your frame may become tight when you receive your slide.
If this is the case, please contact us for free rail fitting.
44 Reviews
-
Shadow 2 Optic Milling
Absolutely fantastic job and quick turnaround time. Could not believe I got my slide back so quickly and that the milling was that good. Cerakote looks great as well, just had to hand cycle to wear it in on the rails. Great customer service.
-
Shadow 2 orange
Had the slide milled for an optic, when it was returned after 4 weeks(ahead of schedule) the fit was so tight it was difficult to even get the slide fitted to the frame. I was advised to use 2000 grit paper on the rails and lapping compound and cycle the slide in the frame a few hundred times.
This ended up working well and the slide is now back to its original smooth action.
Great communication from primary machine. -
Holosun C series
Had my Shadow 2 SAO milled for a Holosun 407C. The work is outstanding. Optic sits nice and low. Graphite Black finish is great. I'll be sending my P01 for milling soon!
-
Slide milling
Beautiful machine work,nice cerakote work,very reasonable turnaround.
-
Optics milling experience
Milling is excellent...only complaint is I lost the original box and site adjustment tool in the process.
-
Shadow 2 slide milling
I recently purchased a CZ Shadow 2 and was looking to get the slide milled for an optic. There are multiple companies out there all very good, but I ultimately settled on primary machine based on the quality of work they do and price. I went with the graphite black finish and it matches perfectly. The Trijicon SRO sits nice and low and only took a few shots to get it zeroed. The process took exactly 6 weeks as they stated on their FAQ’s so no surprises there. I would highly recommend them for your milling work.
-
Shadow 2 Optic Milling
Absolutely perfect!!! Optic fit it perfect... it absolutely just fits like a glove... and finish is spot on.
-
Shadow 2 DPP
Extremely fast turn around and awesome work. Will come back again!
-
CZ SP-01 SHADOW (GEN 1) OPTIC MILLING
Great job!
Related Products
CZ Shadow 2 Optic Screws
