Optic Milling For Glock Pistols
Description
Model: All Generation & Model Glock (43, 43X, 48 Is milled for 407K/507K, or RMRcc, only.)
Service: CNC Mill Slide For Optic (Optic MUST Be Sent With Slide - No Exceptions)
Finish: Cerakote Or Black Nitride
Other: We mill precision pockets for your optic! While many companies will mill an over sized "one size fits all" pocket, ours is precision as per your optic. The cycling of a pistol slide is not gentle. The last thing you want is all that force to simply be on the mounting screws due to an optic pocket milled too big! Screws have been known the shear and break over time due to improperly milled slides.
Configurations For Co Witness Sights Using Suppressor Height Sights:
Trijicon RMR & Holosun 507/508: Optic can be milled in front of rear dovetail or have rear dovetail milled out and mill new Glock dovetail in front of optic.
Deltapoint Pro: For lower 1/3 co witness, you MUST mill out the rear dovetail and mill new dovetail in front of optic. You MUST use plain black suppressor height sights.
If you are not worried about iron sights, any configuration is fine.
220 Reviews
-
Unbelievable Work
Primary Machine did an incredible job milling my Glock 17 for my Vortex Venom. It now sits much lower on the slide and when I bring my gun up, I no longer have to search for the dot - it is right there on target. They also installed Dawson suppressor night sights that perfectly co-witness the dot.
They cerakoted the entire slide and the coating is flawless.
On top of that, I needed to contact them on a few occasions and always received a prompt, courteous response.
I highly recommend Primary Machine to anyone looking to have similar work done on their pistols. I'll be back for future work.
-
Glock 22 milled for Pro point
excellent work , prompt service, got my G22 slide milled and Cerakoted , had suppressor sites installed, all in 2 weeks including shipping time, great job! Only had one minor issue, as my G22 was an early 3rd gen,the plastic recoil spring guide rod had no play to start with, so with the Cerakote it was rather difficult to get it back in the slide for reassembly,But one turn with a piece of extra fine grit sandpaper on the plastic ,and it went right together. Burnt bronze looks great. milling looks great. thanks for the great work.
-
CZ P07 Milling for Vortex Viper w/ buis
Excellent quality work! No machine marks and the Cerekot finish was perfect. I got the rear iron sight mounted in front of the Vortex Viper and it looks like it came from the factory that way. Got the slide back in 3 weeks which was pretty good and it would have gotten back faster if they did not have to wait on the front Dawson Precision sight to come in (I'm sure Glocks and M&P's would not have that issue since they are more popular). Excellent communication and they quickly answered all of my questions. Only issue was that the optic would not turn on when I got it. I took the optic off and covered the side of the battery that faces the slide with electrical tape and the problem was solved. When my wife is ready for a red dot on her VP9 I will be sending the work to Primary Machine!
-
Perfect fit.
Sent three slides in for RMR milling and cerakote; two Glocks and one M&P, the fit and finish is excellent. RMRs fit very tight and co witness with no issues. The Cerakoting was executed better than I could have hoped for. The Dawson sights are impressive. I enthusiastically recommend Primary Machine for your needs.
-
Good work and reasonable turn around
Very pleased with quality of work. Sent my Glock 19 Gen 3 to be milled for Trijicon RMR. Cerekote looks great. This is my first optic milling and could not be happier with outcome. I will be recommending Primary Machine.
-
1st VP9 for Primary Machine
Bruce was easy to deal with. Called me as soon as they received my VP9 slide and Deltapoint pro optic. It was his first VP9 to mill for optic.
We went over all the options,he even refunded me part of the payment I had sent. My slide was back to me in 2 weeks.
Wow!! What a great job! Slide and opitc look awesome! Fit was great,sits nice and low. Titanium slide was beautiful,great finish!
I am a ex machinist so very picky about things being right.
Cant say enough good things about Bruce and Primary Machine..
Thanks again and you will be getting all my future work. -
Excellent machining and coating work done by Primary Machine!
Thanks for the excellent milling and coating work done to my M&P9! It's been a world of difference between the milled slide versus when I ran the gun with Burris' adapter plate since the Burris FastFire III is sitting at least 1/4" lower. I had used the adapter plate to see if I'd like running an optic before committing to slide machining. I just shot a local steel match and couldn't be happier! I've recommended you guys for machining work to everyone who's asked me about my carry optics division pistol.
Thanks again! -
Great job on milling my slide for optics!
Got my CZS P09 slide with my Burris FF3 milled in the mail last Monday. Thee coating looked fantastic and the optic was attached with what appears to be heavier duty torqx screws instead of factory hex screws.
Got it sighted in and then shot it at a local USPSA indoor match, and then a local Steel Challenge match where the gun ran great at both these events.
-
Great job on milling my slide for optics!
Got my CZS P09 slide with my Burris FF3 milled in the mail last Monday. Thee coating looked fantastic and the optic was attached with what appears to be heavier duty torqx screws instead of factory hex screws.
Got it sighted in and then shot it at a local USPSA indoor match, and then a local Steel Challenge match where the gun ran great at both these events.
Related Products
Hk USP45 Optic Milling
Optic Milling for Dan Wesson DWX
