CZ OEM Threaded Barrel
*Minor hand fitting may be required.* (It's super easy. Don't let it discourage you.) The second pic shows a highlighted face where you would remove material IF your barrel needed to be fit. Just a couple passes at a time with fine grit sand paper or a very fine file until it drops in.
- Machined in house from 7075 T6 billet aluminum
- Hard anodized finish
- Fits CZ 9mm barrels with 1/2-28 threads (NOT for .40S&W!)
- Will fit in any CZ P-07/09 open ended holster with no issues
- Set screws are under the comp to keep a cleaner look
- Includes instructions and EVERYTHING needed for install
- Installs in about 2 minutes
- Adds approximately 1.2" to gun length
*We tested several brands of factory 115gr and 124gr ammo with a factory recoil spring in a P-09 with absolutely no issues. *We still recommend using a 15lb recoil spring as these guns are very over sprung from the factory.*
*Remanufactured ammo is known to be loaded weak and may cause cycling issues.
*Always test that your ammo cycles fine before carrying with Stealth Comp. You may need to go down to a 15lb or lighter recoil spring if you're seeing cycling issues.
*Cerakote will add 3-5 days to ship time.*
**These are made for 9MM P-07/09's ONLY. While they will fit any 1/2-28 9MM threaded barrel, we CAN NOT guarantee proper function with other guns and we will NOT accept returns on comps bought that did not work on other guns!**
*DO NOT OVER APPLY LOCTITE TO SET SCREWS. TOOTHPICK TIP DABBED IN BLUE LOCTITE IS ENOUGH! DO NOT OVER TIGHTEN SET SCREWS! WE WILL NOT REPLACE COMPS WITH STUCK/STRIPPED SET SCREWS!*
1 Review Hide Reviews Show Reviews
Performs as good as it looks. Rock solid and come with everything you need to install. Going to buy a couple of more. I need to buy a P-09 just so I can buy another comp